MAC直動式三通電磁閥連接類型與示意圖
當電磁閥線圈斷電時，接口2關閉，接口1通向接口3；
常開式（ZC2/3K）---當電磁閥線圈斷電時，接口3通向接口1，接口2關閉；
當電磁閥線圈通電時，接口3關閉，接口1通向接口2
它是一種直動和先導式相結合的原理，當入口與出口沒有壓差時，通電后，

MAC直動式三通電磁閥連接類型與示意圖
電磁力直接把先導小閥和主閥關閉件依次向上提起，閥門打開。
當入口與出口達到啟動壓差時，通電后，電磁力先導小閥，主閥下腔壓力上升，
上腔壓力下降，從而利用壓差把主閥向上推開；斷電時，
先導閥利用彈簧力或介質壓力推動關閉件，向下移動，使閥門關閉。
特點：1.在真空、負壓、零壓時能正常工作，但通徑一般不超過25mm。
在零壓差或真空、高壓時亦可動作，但功率較大，要求必須水平安裝。
工作原理
常閉型，通電時電磁線圈產生足夠的電磁力把運動部件
（由磁芯、閥桿、上下部的膜片/密封件構成）從閥座上提起，閥門開啟；
斷電時彈簧力把運動部件壓在閥座上，閥門關閉。
常開型，動作方向與常閉型相反。
當電磁閥線圈斷電時，出介質端*路(2)關閉，第二路(3)打開；
二進一出：(ZC2/32) 當電磁閥線圈通電時，進介質端*路(2)打開，第二路(3)關閉；

MAC直動式三通電磁閥連接類型與示意圖
當電磁閥線圈斷電時，進介質端*路(2)關閉，第二路(3)打開；(此內閥兩進口端前必需加單向閥)
一進一出：常閉式(ZC2/3)---當電磁閥線圈通電時，接口2通向接口1，接口3關閉；

Electromagnetic force directly to the pilot valve and the main valve closing parts in turn lift up, the valve open.
When the inlet and outlet to start the pressure difference, the power,
the electromagnetic force pilot small valve, the main valve chamber pressure rise,
The upper chamber pressure drops, so that the use of pressure to push the main valve up; power,
The pilot valve uses a spring force or media pressure to push the closing member and move down to close the valve.
Features: 1. In the vacuum, negative pressure, zero pressure to work properly, but the diameter is generally not more than 25mm.
In the zero pressure or vacuum, high pressure can also be action, but the power is large, the requirements must be installed horizontally.
working principle
Normally closed, energized when the solenoid produces enough electromagnetic force to move the parts
(By the core, stem, the upper part of the diaphragm / seal) from the seat lift, the valve open;
The spring force when the power off the pressure on the valve seat, the valve closed.
Normally open type, the direction of action and normally closed type of the opposite.